The flow values of the individual components of the GARDENA Micro-Drip System in l/h at a flow pressure of approx. 1.5 bar are shown below:
Art. No. 8360 Oscillating Sprinkler Vario 50
at min. width: 175
at max. width: 250
Art. No. 1365 Spray Nozzle 360°: 120
Art. No. 1367 Spray Nozzle 180°: 97
Art. No. 1368 Spray Nozzle 90°: 47
Art. No. 1369 Rotor Sprinkler 360°: 85
Art. No. 1370 Strip Nozzle: 57
Art. No. 1371 Mist Nozzle: 16
Art. No. 1372 End Strip Nozzle: 52
Art. No. 1396 6-Pattern Spray Nozzle
Nozzle 1 - Strip Nozzle: 36
Nozzle 2 - End Strip Nozzle: 35
Nozzle 3 - Jet 90°: 35
Nozzle 4 - Jet 270°: 36
Nozzle 5 - Jet 360°: 35
Nozzle 6 - Jet 180°: 36
Art. No. 8320 Small-Area Nozzle
with 10 cm diameter: 30
at 20 cm diameter: 40
at 30 cm diameter: 42
at 40 cm diameter: 48
Art. No. 8321 Small-Area Nozzle
with 10 cm diameter: 30
at 20 cm diameter: 40
at 30 cm diameter: 42
at 40 cm diameter: 48
Articles in this section
- How many irrigation cycles can I set daily using the Watering Control systems?
- Can I shut off the pop-up sprinklers?
- Is the Micro-Drip-System suitable for hard water?
- Can I also water manually using the auto Water Distributor?
- Are the 4-channel distributors frost-proof?
- What does the lock symbol in My garden planner do?
- Sprinklers are not connected in My garden planner; what can I do?
- How can I change the spring direction/sector of the sprinkler in My garden planner?
- How can I lock areas drawn in My garden planner so that they cannot be changed?
- How can I move the garden in My garden planner?