The holes in the spar are only pre-punched and the self-tapping screws supplied are self-tapping and therefore cut their own threads. This requires a little more force. The best way to do this is with a suitable PH2 Phillips screwdriver.
Articles in this section
- Why does the slider / lock on my spreader wagon not open?
- The screws included with the spreader or leaf and grass collector do not fit or cannot be screwed into the holes in the handlebar/handle.
- How much weight can the 3509-20 appliance holder carry?
- How much weight can the holders or hooks of the appliance holder Art. 3509-20 carry?
- Can the device holder Plus item no. 3509-20 or single holder & single hook Plus item no. 3510-20 also be combined or extended with the old device holder item no. 3501-20 or single holder item no. 3503-20?
- What handle length is recommended for the 2in1 joint scraper?
- What is the advantage of cultivator raking?
- What handle length is recommended for the cultivator rake?
- What type of battery is required for the 1 l EasyPump pump sprayer?
- Are the GARDENA Gloves machine washable?