If your smart device is a robotic lawnmower, see FAQ " Smart update robotic lawnmower is not running".
Please check the Power LED and Internet LED on the gateway. Both LEDs must be permanently green, if this is not the case follow the instructions in the FAQ "Gateway is offline".
If the LEDs on the Gateway light up green, please check in the GARDENA smart App whether the affected devices are online. If this is not the case, please follow the troubleshooting instructions (Help button) in the GARDENA smart App of the affected smart device.
If all devices are online and the update is still not carried out, we recommend that you disconnect the affected smart device from the smart system once and then reconnect it. We also ask you to restart your gateway by disconnecting and reconnecting it once. After this process, the system should communicate properly again and the update should be carried out fully automatically.
Please note:
An incomplete wireless connection between the gateway and the smart devices may lead to the situation described here. This may be due to a less than ideal installation location for the gateway. It is best to install the gateway where you can expect the least radio resistance, e.g. directly at a window facing your garden. An installation location such as in the basement or on the roof could cause a higher radio resistance and thus reduce the radio quality between the smart products. Please ensure that there are no obstacles, such as a wooden hut, metal objects, walls or similar, between the gateway and the associated smart devices. This can lead to problems with the wireless connection.
If your question has not been answered by the points listed so far, please contact GARDENA Service.
Please check the Power LED and Internet LED on the gateway. Both LEDs must be permanently green, if this is not the case follow the instructions in the FAQ "Gateway is offline".
If the LEDs on the Gateway light up green, please check in the GARDENA smart App whether the affected devices are online. If this is not the case, please follow the troubleshooting instructions (Help button) in the GARDENA smart App of the affected smart device.
If all devices are online and the update is still not carried out, we recommend that you disconnect the affected smart device from the smart system once and then reconnect it. We also ask you to restart your gateway by disconnecting and reconnecting it once. After this process, the system should communicate properly again and the update should be carried out fully automatically.
Please note:
An incomplete wireless connection between the gateway and the smart devices may lead to the situation described here. This may be due to a less than ideal installation location for the gateway. It is best to install the gateway where you can expect the least radio resistance, e.g. directly at a window facing your garden. An installation location such as in the basement or on the roof could cause a higher radio resistance and thus reduce the radio quality between the smart products. Please ensure that there are no obstacles, such as a wooden hut, metal objects, walls or similar, between the gateway and the associated smart devices. This can lead to problems with the wireless connection.
If your question has not been answered by the points listed so far, please contact GARDENA Service.