If the blockage is caused by sand/iron or small stones from the inside, we can only recommend removing the affected section and replacing it with connectors and a new piece of drip pipe. In general, we recommend using a suitable pre-filter to prevent future failure due to suspended particles in the water.
Articles in this section
- My rain barrel pump 4000/2 automatic Art. 1742 no longer switches on automatically or keeps switching on without taking water. Where is the fault?
- My rain barrel pump 4700/2 inox Art. 1766 automatic no longer switches on automatically or keeps switching on without taking water. Where is the fault?
- My submersible pressure pump 5900/4 inox automatic Art. 1771 or 6100/5 inox automatic Art. 1773 no longer switches on automatically, or keeps switching on without removing water. What is the fault?
- Watering is carried out although the sensor indicates "moist".
- The motor of my pump is not running. The pump is humming.
- When watering is started, several valves are opened/the same valve is always opened.
- My pump is not pumping enough water, what could be the reason?
- My garden pump with safepump function (1734 or 1736) does not switch off automatically. What could be the reason for this?
- My automatic domestic water heater does not switch off automatically. What could be the reason for this?
- My domestic water system does not prime. What could be the reason?