When Powerboost is activated, the pump decides whether Powerboost is switched on when the switch-off pressure is reached. This is then based on the currently measured flow rate. If the flow rate is above 300 l/h, the shut-off pressure is ignored and the pump runs in Powerboost. If the flow rate is below this, Powerboost is not switched on or off.
Articles in this section
- My rain barrel pump 4000/2 automatic Art. 1742 no longer switches on automatically or keeps switching on without taking water. Where is the fault?
- My rain barrel pump 4700/2 inox Art. 1766 automatic no longer switches on automatically or keeps switching on without taking water. Where is the fault?
- My submersible pressure pump 5900/4 inox automatic Art. 1771 or 6100/5 inox automatic Art. 1773 no longer switches on automatically, or keeps switching on without removing water. What is the fault?
- Watering is carried out although the sensor indicates "moist".
- The motor of my pump is not running. The pump is humming.
- When watering is started, several valves are opened/the same valve is always opened.
- My pump is not pumping enough water, what could be the reason?
- My garden pump with safepump function (1734 or 1736) does not switch off automatically. What could be the reason for this?
- My automatic domestic water heater does not switch off automatically. What could be the reason for this?
- My domestic water system does not prime. What could be the reason?