The Perl sprinkler can only be installed above ground. It should be laid on the ground and only covered with bark mulch or ground cover. If it is buried, there is a risk of the pores becoming blocked or roots growing into the pores.
Please note that a maximum of 30 meters may be laid in one piece. The bead sprinkler can be laid linearly along a hedge or in serpentine lines through a bed.
The operating pressure upstream of the perl sprinkler should be at least 2 bar. The water consumption is 10 to 15 l/h per meter depending on the outside temperature and the setting of the controller.
A Perl sprinkler connection set art. no. 1989 (included in the scope of delivery of the pre-assembled Perl sprinklers with a length of 7.5 m and 15 m) must be installed at the start of the Perl sprinkler.
Set the water quantity so that the sprinkler only sprays!
Please note that a maximum of 30 meters may be laid in one piece. The bead sprinkler can be laid linearly along a hedge or in serpentine lines through a bed.
The operating pressure upstream of the perl sprinkler should be at least 2 bar. The water consumption is 10 to 15 l/h per meter depending on the outside temperature and the setting of the controller.
A Perl sprinkler connection set art. no. 1989 (included in the scope of delivery of the pre-assembled Perl sprinklers with a length of 7.5 m and 15 m) must be installed at the start of the Perl sprinkler.
Set the water quantity so that the sprinkler only sprays!