The smart Irrigation Control is the smart multi-channel controller for up to six irrigation zones with different requirements.
The smart Irrigation Control can only be programmed together with the GARDENA smart Gateway.
The smart Irrigation Control is automatically controlled via the GARDENA smart system App.
Sprinklers, a sprinkler system or a drip irrigation system can be used for irrigation.
drip irrigation system can be used.
The smart Irrigation Control has IPX4 protection class (splash water protected) and is therefore suitable for outdoor installation. Further information on installation can be found in the relevant operating instructions.
The smart Irrigation Control has six valve connections and is compatible with almost all commercially available 24 V irrigation valves.
You can currently program up to 36 different watering times per day and copy these to each day of the week. This means that up to 252 watering cycles per week are theoretically possible.
You can also use the "sensor-assisted watering" function in conjunction with a smart sensor.
In this case, you can select the assignments from the smart sensor to the smart Irrigation Control completely independently.
You can assign different valves to a smart sensor at the same time or assign a separate smart sensor to each valve.
Manual watering of the irrigation valves is possible at any time via the smart app. In terms of software, only two watering valves can be opened at the same time. Reason: Experience has shown that the pressure loss with three valves open at the same time would be so high that adequate irrigation is normally not possible (the pop-up sprinklers, for example, do not move up).
The smart Irrigation Control can only be programmed together with the GARDENA smart Gateway.
The smart Irrigation Control is automatically controlled via the GARDENA smart system App.
Sprinklers, a sprinkler system or a drip irrigation system can be used for irrigation.
drip irrigation system can be used.
The smart Irrigation Control has IPX4 protection class (splash water protected) and is therefore suitable for outdoor installation. Further information on installation can be found in the relevant operating instructions.
The smart Irrigation Control has six valve connections and is compatible with almost all commercially available 24 V irrigation valves.
You can currently program up to 36 different watering times per day and copy these to each day of the week. This means that up to 252 watering cycles per week are theoretically possible.
You can also use the "sensor-assisted watering" function in conjunction with a smart sensor.
In this case, you can select the assignments from the smart sensor to the smart Irrigation Control completely independently.
You can assign different valves to a smart sensor at the same time or assign a separate smart sensor to each valve.
Manual watering of the irrigation valves is possible at any time via the smart app. In terms of software, only two watering valves can be opened at the same time. Reason: Experience has shown that the pressure loss with three valves open at the same time would be so high that adequate irrigation is normally not possible (the pop-up sprinklers, for example, do not move up).